InduinoX User Guide - List of Contents

 Induino Blog Overview - List of Contents (For Easy Navigation!!!)


  1. Induinox User Guide - Important Updates
  2. InduinoX - An Overview   
  3. Simple Labs' InduinoX and Arduino Uno Comparison
  4. InduinoX - Getting Started Guide
  5. InduinoX User Guide - Building a 3-Bit Binary Counter
  6. InduinoX User Guide - Programming the Push Buttons
  7. InduinoX User Guide - Programming the RGB LED
  8. InduinoX User Guide - Programming the LDR
  9. InduinoX User Guide - Working with RTC DS1307
  10. InduinoX User Guide - Working with TSOP IR Receiver - Part 1
  11. InduinoX User Guide - Working with TSOP IR Receiver - Part 2
  12. InduinoX User Guide - Working with the IR LED
  13. InduinoX User Guide - Programming the Arduino Booloader
  14. InduinoX User Guide - Interfacing with the InduinoX LCD Shield
  15. InduinoX User Guide - Interfacing with the Wireless Shield / BTBee
  16. InduinoX User Guide - Working with NEC Remotes
  17. InduinoX User Guide - Interfacing with the Simple Labs' Servo Shield
  18. InduinoX User Guide - Interfacing with the ENC28J60 Ethernet Shield
  19. InduinoX User Guide - Interfacing with the ENC28J60 Ethernet Module
  20. InduinoX User Guide - Interfacing with the Motomama Motor Driver Shield
  21. InduinoX User Guide - Interfacing with the Dual Stepper Motor Driver Shield
  22. InduinoX User Guide - RDM630 RFID Module


InduinoX User Guide - Important Updates

As the world of Arduino changes, the Induinox board also changes. This page is to update you of such changes.
15 February 2013
We have received a few emails from customers on their difficulty in using the rev 3 shields with the Induinox. This is a mechanical comparability issue add the rev3 shields have 2 pins more on each side. So when a rev 3 shield is placed, these additional pins end up on top of the jumpers for the button on pin 8 and on top of a capacitor on the other side. As a temporary fix, the next lot of Induinox boards will not have the jumpers for the middle button on pin 8 and the capacitor will also be removed. This is a temporary fix and will be resolved in our next design. This will not cause any changes to the way the Induinox works excepting the fact that there will now be 1 less button...